Eterno Ivica's News presented at Cersaie for 2027
The solutions that Eterno Ivica presents for 2027 collect the research work of recent months, carried out in close contact with designers, installers and companies. The Cersaie 2026 was the moment chosen to unveil them. In Bologna we showed a new windproof system for stoneware floors, a solution dedicated to outdoor steps and a series of accessories designed for installation and maintenance on site.
Each novelty responds to a concrete need of the project: the stability of the slabs exposed to the wind, the connection between floors at different heights, the laying on gravel and natural substrates, the possibility of intervening on the single slab or slab with the rest of the flooring in its place.
Windproof System GRF
Windproof installation system for raised floors on a grid.
GRF Windproof System brings the stability of grid laying to wind-exposed stoneware floors. The plate is fixed to the Grid with an adhesive spread along a dedicated guide. At each corner, a locking plate joins the grids and holds the entire system together. The safety screw that fixes it to the support can also be added to the finished floor, inserting it between the joints.
Benefits:
- High resistance to lifting due to wind
- Breakthrough safety
- Increased flow rate thanks to the fixing of the slab to the Grid
- Leaks already integrated into the Grid
- Compatible with all Eterno Ivica media
- For plates 600 x 600 mm, thickness 20 mm, gauge 595 to 600 mm
The installation in three steps: positioning and adjustment of the supports, fixing of the plates to the Grid, insertion of the locking plate at each corner.
StepDeck Solution
The new solution for creating outdoor steps
StepDeck brings the step into the elevated system. A new joint fits into the Eterno Ivica joist cavity and is fixed with four side screws. It works together with the already established accessories of the range and allows you to connect floors at different heights with the same finish as the rest of the flooring.
The finishing clips complete the step and accommodate 20 mm plates, in vertical and horizontal installation. The exposed clips offer a solid and immediate mechanical fixation. The concealed clips are housed in the milled groove of the slab, for a clean finish, free of visible metal elements.
Benefits:
- Designed for outdoor steps
- Aesthetic uniformity over the entire finishing surface
- Compatible with Pedestal, Woodeck and GRF systems
EH Slim
The ultra-thin 4 mm fixed support for laying on gravel
EH Slim is designed for floors laid on gravel and natural substrates. The 4 mm profile incorporates 2 mm spacer fins on the inner side and 4 mm on the outer side, which can be removed if necessary. It is used whole, in half or in quarters for perimeters and corners, and is combined with the leveler for laying with a linear spacer. With the adhesive, which penetrates through the through holes, the anchor becomes firmer. When needed, it also rests dry.
Specifications:
- Thickness 4 mm, diameter 190 mm
- Integrated 2 and 4 mm spacer fins
- Can be used whole, in half or in quarters
Removable joist clips
Targeted sealing, adjustment and removal
Removable universal joist clip
For wooden slats and WPC. The polyamide clip works with a double screw: the first is fixed to the beam, the second locks the slat and supports its natural thermal expansion. It is height adjustable, compatible with all Eterno Ivica joists. Allows targeted inspections and maintenance on the single slat, with the rest of the floor in place.
Go to the Removable Universal Joist Clip page
Removable windproof clip for joist
For stoneware slabs with a groove. It inserts along the joist and engages in the groove of the slab with a 90° rotation. The mechanical locking counteracts the lifting caused by wind gusts, while the flooring remains completely removable.
See the specifications of the Removable Wind Clip for joist