Accessories
Accessories that increase the speed, precision and elegance of decking surfaces' installation.
Report of the events | December 2020
A report of all the events that have seen Eterno Ivica protagonist - The greetings of the President Gabriele Favero

Aluminum joist - Substructure for raised flooring
Aluminum joist - Substructure for raised flooring 1) Aluminum joist with binary on one side for the sliding of the Eterno Ivica clips, and longitudinal slot for the mechanical fastening of them. 2) The opposite side of the joist is equipped with a slot suitable to accommodate all types...

Clip for aluminium joist
Clip for aluminium joist Clip with “bayonet” base for insertion on the joist track. This way the clip can be inserted at any point of the track and rotate up to 40 °, without being bound to the orthogonality that is usually created in the classic pose between joists, clips and planks. ...

Clip WFS® head for vertical infill
The infill of the pavement edge is a detail that can not be left to chance.The WFS® vertical padding clip makes it possible to close the perimeter edges of raised floors with extreme ease and elegance. This solution is composed of two special clips in stainless steel, shaped as to be perfectly...

Clip WFS® base for vertical infill
The infill of the pavement edge is a detail that can not be left to chance.The WFS® vertical padding clip makes it possible to close the perimeter edges of raised floors with extreme ease and elegance. This solution is composed of two special clips in stainless steel, shaped as to be perfectly...

New aluminium joist for rapid flow
New aluminium joist for rapid flow The new aluminium joist for rapid flow is a “double joist” consisting of two profiles spaced by a 6.5 mm gap which serves as drainage for the rapid outflow of rainwater. It has been designed for the installation of porcelain stoneware slabs, multi-f...

Quick flow joint joist
Quick flow joint joist Quick flow joint joist for the new aluminium joist.

PVC gasket for quick flow joist
PVC gasket for quick flow joist PVC gasket for the new aluminium quick flow joist.

Joint for joists
Joint for joists The Eterno Ivica joist joint is a non - structural product, therefore it only acts as a connection between various joists to avoid any displacement. Made of black polypropylene, it can be used both on cantilever beams and on rafters laid on the head. It presents the sp...

Crisscross NM head for aluminium joist
Crisscross NM head for aluminium joist This new type of head allows to lay on the support one, two, three or four aluminium joists at the same time. It can be used as a replacement of the standard head for on or two joists or to support multiple joists on the same head; it is in fact a “cross ...

Crisscross SE head for aluminium joist
Crisscross SE head for aluminium joist This new type of head allows to lay on the support one, two, three or four aluminium joists at the same time. It can be used as a replacement of the standard head for on or two joists or to support multiple joists on the same head; it is in fact a “cross ...